Danske IPTV-kanaler

I have 2 MAG 254 units. They we're working good with the WiFi antenna until all
over the sudden it froze then they shut off. I have unplugged …

My Mag box 250 won't power up,i have tried a power adaptor from another box
which is working fine. has anybody got any idea what it could …

Hi I bought a MAG250 yesterday and had it running just 1 hour. Did an update
and then … I have tried to burrow MENU button or the POWER…

Jun 22, 2015 … mag 254 wont turn on | STB MAG – 245/250 • 254/255 • 270/275.

Hi, My Mag 250 was working fine with my new tv, then I disconnected it and put it
to my old LCD tv, it started to load informir image, then …

Hi Moose or any other Mod, problem with mag 254, when I turn on with remote
there is no signal from mag and TV screen is blank. I unplug it …

Nov 14, 2013 … How to enter the BIOS setup (bootloader menu) MAG-200/250? Power off STB …
The remote trick won't do it and there is no power button.

Power off the MAG IPTV box, and disconnect it from the power. Press and hold …
mag 254 iptv set top box bios settings default settings menu. Press the right to …

Do you just turn off TV and let the HDMI turn off the mag 254? … to the device
frozen and won't turn on/off or take any remote control commands, …

MAG322 Infomir HEVC IPTV Set….
… MAG 250 UNBRICK SERVICE.
… If your box has recently stopped working afer you have updated it and there is no blue power light we can repair this for you.

Jan 27, 2017 … He has had IPTV for the past three years, through a MAG250 box and …. This
morning we had a power cut for about an hour, and when we tried …

Aug 15, 2017 … Re: mag 254 wont turn on. Press and hold the «menu» on the remote (or the
power button on the front panel). Description; Reviews. This is the …

So, brand new MAG 254, and it won't turn on after it's been off for a few hours.
The LED on the front doesn't respond to the remote, just stays at …

Hello, So today i went to my box to go watch some tv, but it would not turn on. It
had no light on the box so i unplugged it from the back. The blue …

How to enter the BIOS setup (MAG 250 bootloader menu). Power off the STB
MAG200/250. Press and hold the «menu» on the remote (or the power button on
 …

First check the plug is securely connected to your mains and is switched on.
Once you've done that, head around the back of your box and check the power
lead …

for MAG 254 and higher models · $7.20 · Power Supply for MAG 250 … this does
not cover lightning strikes or power surges or physical damage to the product, …

Solved: Hi guys, I need help because I am getting very frustrated with this
situation. I have just bought a MAG 254 which is an IPTV box …

May 6, 2015 … The issue happens when the user turns their TV off. When they turn their TV back
on the mag 250 doesn't respond to the remote control.